A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-1714002.png)
-
Lay horn cable in a loop to the outside.
-
Tighten bolts -1 - (2x) to a torque of 7 Nm.
-
Switch ignition on.
CAUTION: There must be no one in the vehicle when the battery is being connected.
-
Connect battery Ground (GND) strap.
6. Horn connector
7. Multi-point socket head bolt
-
Tightening torque 50 Nm
8. Connector for heated steering wheel
9. Self-cancelling ring with slip ring
NOTE:
-
After connecting the battery observe the necessary measures.
-
If Airbag Malfunction Indicator Lamp (MIL) K75 signals a malfunction after assembly, use vehicle diagnostic, testing and information system
VAS 5051 A to interrogate, erase and then again interrogate DTC memory.
