A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
-
Installation is in reverse order of removal.
-
Ensure that connector and catch engage fully (i.e. audibly).
-
Ensure that no cable is on gas generator.
-
Ensure that airbag cable is not trapped. Lay airbag cable in a loop to the left.
-
Tighten bolts - 3- (2x) to a torque of 7 Nm.
-
Switch ignition on.
CAUTION: There must be no one in the vehicle when the battery is being connected.
-
Connect battery Ground (GND) strap.
NOTE:
-
After connecting the battery observe the necessary measures.
-
If Airbag Malfunction Indicator Lamp (MIL) K75 signals a malfunction after assembly, use vehicle diagnostic, testing and information system
VAS 5051 A to interrogate, erase and then again interrogate DTC memory.