A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-1745002.png)
-
Before loosening subframe, use special tool -3393- to check whether holes - 1 - and - 2 - are aligned.
If they do not, you must perform wheel alignment after the subframe is re-installed.
-
Loosen nuts - arrows - at transmission mounts.
-
Remove nut - 1 -.
-
On vehicles with headlight range control, detach coupling rod for self leveling sensor from track control link.
-
Remove bolt - 5 - for ABS speed sensor.
-
Detach ABS speed sensor wiring from bracket on wheel bearing housing.
