audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fluid Filter - CVT > < Transmission Bell Housing, ATF Leaking|Page 4830
Page 3
background image

-

Turn shut-off valve in direction of filler hose -lower arrow-. ATF flows into transmission.

-

Fill at least 4.5 to 5 liters ATF into transmission.

-

Selector lever in P, start engine and let run at idle.

For vehicles as of model year 2005:
^

Selector lever in position P
-

Let engine run at high speed at a minimum of 2500 RPM by depressing the accelerator pedal.

CAUTION:  It is necessary to run engine at high speeds so that ATF pump is ventilated after performing repairs on the transmission.

All model years:
-

Check ATF level and correct.

Note:  
^

Observe aft notes and test requirements for Checking ATF level and topping off.

Fluid Filter - CVT > < Transmission Bell Housing, ATF Leaking|Page 4830