A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-1281002.png)
-
Before installing Transmission Control Module (TCM) J217, coat new O-rings -A- on hydraulic control module with ATF.
-
Install Transmission Control Module (TCM) J217 without canting it.
^
Harness connectors -A-, -B- and -C- on rear side of control module must engage on hydraulic control module.
-
Tighten bolts -arrows-.
-
Install end cover.
After connecting Transmission Control Module (TCM) J217, perform the following steps:
-
Perform coding new Transmission Control Module (TCM) J217.
-
Perform adaptation for Transmission Control Module (TCM) J217.
Use Vehicle Diagnosis, Testing and Information System VAS 5051 A.
