A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-1326004.png)
-
Tighten bolts -arrows-.
Installing slider for selector lever position -C-
-
Connect roller -B- with collar pointing downward onto slider for selector lever position -C-.
-
Hook spring -A- into selector shaft -D- and slider for selector lever position.
-
Push slider for selector lever position into bearing hole in housing of hydraulic control assembly.
Note:
^
This illustration shows the transmission without hydraulic control assembly.
-
Shift selector shaft lever -2- toward front and rear until stop:
