A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Rear Final Drive: Service and Repair
Rear differential bushing, replacing
Special tools, testers and auxiliary items required
Assembly tool T40032
Engine/transmission jack V.A.G 1383 A
^
Torque wrench V.A.G 1331
^
Torque wrench V.A.G 1332
Removing
-
Position Engine/transmission jack V.A.G 1383 A with universal transmission support 1359/2 under rear final drive and secure rear final drive.
-
Remove bolts securing front support of rear final drive - arrows -.
-
Remove drive shaft from rear final drive.
-
Secure drive shaft to body with wire.
-
Remove combi bolts at differential bushings.
-
Remove bolts securing rear final drive to rear crossmember.
Note:
^
Lower rear final drive. just enough for access to remove upper bolt.
-
Remove rear crossmember from below.