A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
-
Use removal and assembly tool T40032 as shown in illustration and pull out differential bushing.
Note:
^
For ease of illustration, the subframe is shown removed from the vehicle.
Installing
-
Align differential bushing as illustrated.
-
Use removal and assembly tool T40032 as shown in illustration and install differential bushing - arrow -.
Note:
^
Install from the front.
^
Outer ring of bushing flush with sleeve on subframe.
-
Position rear crossmember on rear final drive and tighten combi bolts.
-
Bolt rear crossmember to subframe.
-
Bolt front support to rear final drive.
-
Bolt drive shaft to rear final drive.
-
Remove engine/transmission jack V.A.G 1383 A.