A4 Cabriolet V6-3.0L (AVK) (2003)
/Page-2204001.png)
Child Seat: Testing and Inspection
Child-seat Restraint Function For Additional Child Seats (Not For Driver's Seat Belt), Checking
-
The complete belt assembly (including side panel trim) must be installed when checking this function.
-
Activation of restraint function:
-
Pull out belt as far as possible.
-
Correct function:
-
The belt should retract with an audible noise.
-
If the belt retraction is stopped, it should not be possible to pull the belt out again until the function is deactivated.
-
Deactivation:
-
Allow the belt to retract as far as the last 100 mm (approx.).
-
Restraint function must be deactivated at the latest when last 100 mm are reached. The belt then re-assumes its normal function.
