A4 Cabriolet V6-3.0L (AVK) (2003)
Steering Wheel: Service and Repair
Standard Steering Wheel, Removing and Installing
Steering Wheel (Standard Steering Wheel), Removing And Installing
1
-
Torx bolts (T 30) (2x)
-
Tightening torque 7 Nm.
2
-
Steering wheel
-
Removing
- Remove airbag unit (standard steering wheel).
- Center steering wheel (wheels in straight-ahead position).
- Unscrew bolt -7-.
- Disconnect connector for coil -3-.
- Heated steering wheel: Detach steering wheel heating connector -8-.
- Remove steering wheel -2-.
-
Installing
- Installation is in reverse order.
- Ensure that connector and catch engage fully (i.e. audibly).
- Attach steering wheel in center position (wheels straight ahead).
- Replace bolt -7- and tighten to 50 Nm.
3
-
Connector for coil
4
-
Connector for airbag unit
5
-
Airbag unit
6
-
Horn connector
7
-
Multi-point socket-head bolt
-
Tightening torque 50 Nm
8
-
Connector for steering wheel heating
9
-
Self-cancelling ring with slip ring