audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing radiator grille > < Removing, installing and adjusting bonnet

A4 Cabriolet Mk2

Removing and installing gas-filled strut
Removing and installing gas-filled strut
   
–  Support bonnet or secure to stop it closing.
–  Use screwdriver to slightly lift retaining springs -arrow- at both ends of gas-filled strut and unclip gas-filled strut.
–  To install, press gas-filled strut onto ball stud and engage.
–  Gas-filled strut cylinder is installed at body end.
  A55-0172
Releasing gas from gas-filled strut
  WARNING
Only clamp strut in this area to avoid risk of accident.
–  Clamp gas-filled strut in vice in area -x- = 50 mm.
–  Cover saw cut area with a cloth to catch fluid escaping.
  WARNING
Wear safety goggles whilst sawing.
–  Saw open cylinder of gas-filled strut in first third of overall cylinder length, based on reference edge at piston rod end.
  V55-0080

Removing radiator grille > < Removing, installing and adjusting bonnet