A4 Cabriolet Mk2
Removing, installing and adjusting bonnet |
Up to Model Year 2005 |
1 - | Bonnet |
q | Removing: |
– | Disconnect and unclip tubing for windscreen washer system. |
Note
A second mechanic is required to support and lift off the bonnet. |
– | Detach gas-filled strut → Item from bonnet → Item → Chapter. |
– | Unscrew nuts → Item. |
– | Detach bonnet. |
q | Install in reverse order. |
q | Adjusting: |
– | Align bonnet → Item between wings. |
– | Bonnet height is adjusted by way of bonnet lock → Chapter. |
– | Bonnet can be adjusted with respect to wings by means of buffer stops → Fig. |
2 - | Bonnet hinge |
q | Bonnet → Item must be removed or reliably supported. |
q | To remove, unscrew bolts → Item and nuts → Item. |
3 - | Bolt |
q | 21 Nm |
4 - | Nut |
q | 21 Nm |
5 - | Gas-filled strut |
q | Removing and installing → Chapter |
Note
|