A4 Cabriolet Mk2
| Removing and installing bumper cross member |
Note| Bumper cover removed |
| 1 - | Bolt |
| q | 18 Nm |
| q | 4x |
| 2 - | Grommets |
| 3 - | Support piece |
| 4 - | Bolt |
| q | 1.5 Nm |
| 5 - | Cross member |
| 6 - | Nut |
| q | 20 Nm |
| q | 2x |
| 7 - | Bolt |
| q | 20 Nm |
| q | 2x |
| 8 - | Impact absorber |
| q | Insert the impact absorber in the cross member → Item and tighten the bolt → Item or nut → Item. |
