audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing toothed segment for variable convertible roof compartment > < Removing handle for variable convertible roof compartment

A4 Cabriolet Mk2

Removing microswitch for variable convertible roof compartment
Removing microswitch for variable convertible roof compartment
–  Remove variable convertible roof compartment → Chapter.
   
–  Pull off floor covering -1- (convertible roof compartment lining) on right side to such an extent that the two bolts -2- can be accessed.
t  Bond on floor covering with D 001 200.
–  Remove bolts -2- (2x).
t  Tightening torque: 4 Nm
–  Separate centre section of convertible roof compartment -3- from right-side section -4-.
  A70-0972
–  Pull apart side sections -1- and -2-.
–  Remove bolts -3- (4x) from inside lid.
t  Tightening torque: 2 Nm
–  Detach inside lid -1-.
–  Carefully drill off microswitch weld on outside.
  A70-0961
–  Take out microswitch -1-.
–  Use soldering iron to weld on new microswitch -1- on outside.
  A70-0960

Removing toothed segment for variable convertible roof compartment > < Removing handle for variable convertible roof compartment