A4 Cabriolet Mk2
Note
|
| 1 - | Bolt |
| q | Replace |
| q | Tightening torque 20 Nm |
| q | Slackening off and tightening → Chapter |
| 2 - | Drive plate |
| q | Different versions → Parts List |
| q | Detaching/attaching → Chapter |
| q | Tripped in the event of excessive torque (e.g. compressor stiff) |
| 3 - | Circlip |
| q | Replace |
| q | Ensure correct positioning (flat side facing compressor) |
| q | Removing and installing → Chapter |
| 4 - | Pulley |
| q | Rubber element of pulley is tripped in the event of excessive torque (e.g. stiff compressor) and pulley just free-wheels without driving compressor |
| q | Different versions → Parts List |
| q | Detaching/attaching → Chapter |
Note| Under certain conditions (e.g. rough engine running), rubber element of pulley may be tripped when there is no compressor or refrigerant circuit fault. |
| 5 - | Compressor |
| q | Different models are fitted depending on engine and country version → Parts List |
| q | Clean flange of compressor before fitting pulley |
