–
| Remove high-pressure sender -G65--C-, tightening torque: 5 Nm. |
–
| Replace O-ring -A- (10.8 mm; 1.8 mm) → Chapter. |
Note t
| The cooling output cannot be checked with the high-pressure sender -G65- removed; the operating and display unit, Climatronic control unit -J255- does not switch on the compressor. |
t
| The refrigerant circuit remains closed, “connection with valve”. |
t
| Checking operation of high-pressure sender -G65- and signal supplied → Chapter and → Chapter. |
|
|
|