| –
| Remove securing bolt -A- and remove flange shaft -B- (left-side) → Chapter. |
| –
| Pry out oil seal -C- using oil seal extractor lever -VW 681-. |
| –
| Using a screwdriver, lever out drive wheel -D- for speedometer sender -G22- on alternate sides at the coupling lugs -arrows-. |
| –
| Install drive wheel for speedometer sender -G22-. |
| l
| The coupling lugs -arrows- face towards the oil seal. |
Note | Fit the drive wheel carefully onto the differential, making sure that it is kept straight. Do not use force; the drive wheel can break easily. |
| –
| Engage coupling lugs in slots in differential cage. |
|
|
|
