audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Changing gear oil in transfer box or filling up after repairs > < Gear oil in transfer box
Checking gear oil level in transfer box and topping up
Checking gear oil level in transfer box and topping up
Special tools and workshop equipment required
   
t  Used oil collection and extraction unit -V.A.G 1782-
t  Safety goggles
Procedure
  Note
t  General repair instructions → Chapter.
t  Observe rules for cleanliness when working on automatic gearbox → Chapter.
–  Drive vehicle onto a lifting platform or over an inspection pit in order for it to be absolutely horizontal.
–  Place used oil collection and extraction unit -V.A.G 1782- below gearbox.
  WARNING
Wear safety goggles.
  W00-10211
–  Remove plug from oil filler hole -arrow B-.
  Note
Detach or remove parts of the exhaust system as required if the screw plug for the oil filler hole is not easily accessible → Rep. Gr.26.
l  The oil level must be up to the bottom lip of the filler hole.
–  Top up with gear oil if necessary; specification → Chapter.
  Note
The screw plug with seal must be renewed.
–  Install new screw plug for oil filler hole.
Tightening torque
  A39-0092
ComponentNm
Oil filler plug35

   

Changing gear oil in transfer box or filling up after repairs > < Gear oil in transfer box