audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing selector mechanism on vehicles with vehicle ID No. from 8E_8A 002700 onwards > < Removing and installing selector lever lock solenoid N110 on vehicles with vehicle ID No. up to 8E_8A 002700

A4 Cabriolet Mk2

Exploded view - dismantling and assembling selector mechanism on vehicles with vehicle ID No. from 8E_8A 002700 onwards
Exploded view - dismantling and assembling selector mechanism on vehicles with vehicle ID No. from 8E_8A 002700 onwards
  Note
Lubricate all bearings and moving surfaces with polycarbamide grease -G 052 142 A2-.
   
1 - Rubber seal
2 - Adapter
q   Attached to shift unit and secured with bolts → Item
3 - Bolt
q   2 Nm
q   4x
4 - Shift unit
5 - Selector lever lock solenoid -N110-
q   → Chapter „Removing and installing selector lever lock solenoid -N110- on vehicles with vehicle ID No. from 8E_8A 002700 onwards“
6 - Retaining clip
q   Secures selector lever cable to shift unit
7 - Selector lever cable
q   → Chapter „Exploded view - selector lever cable and locking cable on vehicles with vehicle ID No. from 8E_8A 002700 onwards“
q   → Chapter „Checking and adjusting selector lever cable on vehicles with vehicle ID No. from 8E_8A 002700 onwards“
8 - O-ring
q   Renew
9 - Nut
q   8 Nm
q   4x, secures shift unit to body

   

Removing and installing selector mechanism on vehicles with vehicle ID No. from 8E_8A 002700 onwards > < Removing and installing selector lever lock solenoid N110 on vehicles with vehicle ID No. up to 8E_8A 002700