–
| Remove screw plug -arrow-. |
–
| Fill front final drive slowly and at a constant rate for a period of at least 5 minutes until gear oil (capacity and specification → Chapter) comes out at lower edge of oil filler hole. |
Note t
| The fill-up period of at least 5 minutes is necessary so that the internal oil level can be balanced out between the differential and the baffle chamber. |
t
| The screw plug with seal must be renewed. |
–
| Tighten new screw plug to 35 Nm. |
Note The level does not need to be re-checked after this step. |
|
|
|