A4 Cabriolet Mk2
Exploded view - rear final drive on Audi A8 |
1 - | Subframe |
q | Removing and installing → Rep. Gr.42 |
2 - | Hexagon bolt |
3 - | Washer |
4 - | Nut |
q | 40 Nm |
q | Self-locking |
q | Renew |
5 - | Hexagon socket head bolts |
q | 55 Nm |
6 - | Rear cross member |
7 - | Drive shaft |
q | Removing and installing → Rep. Gr.42 |
8 - | Heat shield |
9 - | Bolt with washer |
q | 25 Nm |
10 - | Final drive support |
q | Note assembly sequence → Anchor |
11 - | Hexagon socket head bolts |
q | 40 Nm + 90° |
q | Renew |
12 - | Hexagon socket head bolt |
q | 40 Nm + 90° |
q | Renew |
13 - | Hexagon socket head bolts |
q | 20 Nm |
14 - | Washer |
15 - | Cover |
q | Depending on version |
16 - | Bolt with washer |
q | 40 Nm |
17 - | Rear final drive |
q | Removing and installing → Chapter |
18 - | Nut |
q | Self-locking |
q | Renew |
q | Tightening torque → Rep. Gr.42 |
19 - | Washer |
20 - | Hexagon bolt |