A4 Cabriolet Mk2
| Exploded view - rear final drive on Audi A8 |
| 1 - | Subframe |
| q | Removing and installing → Rep. Gr.42 |
| 2 - | Hexagon bolt |
| 3 - | Washer |
| 4 - | Nut, 40 Nm |
| q | Self-locking |
| q | Renew |
| 5 - | Hexagon socket head bolts, 55 Nm |
| 6 - | Rear tunnel brace |
| 7 - | Drive shaft |
| q | Removing and installing → Rep. Gr.42 |
| 8 - | Heat shield |
| 9 - | Bolt with washer, 25 Nm |
| 10 - | Final drive support |
| q | Note assembly sequence |
| 11 - | Hexagon socket head bolt, 40 Nm + tighten 90° (1/4 turn) further |
| q | Renew |
| 12 - | Hexagon socket head bolt, 40 Nm + tighten 90° (1/4 turn) further |
| q | Renew |
| 13 - | Not fitted |
| 14 - | Not fitted |
| 15 - | Not fitted |
| 16 - | Not fitted |
| 17 - | Rear final drive |
| q | Removing and installing → Chapter |
| 18 - | Nut |
| q | Self-locking |
| q | Renew |
| q | Tightening torque → Rep. Gr.42 |
| 19 - | Washer |
| 20 - | Hexagon bolt |
