audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator fan > < Removing and installing radiator

A4 Cabriolet Mk2

Removing and installing radiator cowl
Removing and installing radiator cowl
   
Removing
–  Move lock carrier to service position → Chapter.
–  Unplug electrical connectors -1- and -2-.
–  Move wiring clear.
  A10-0954
–  Unplug electrical connector -1- for bonnet lock and move wiring clear.
–  Unscrew bolts -arrows- and lift out radiator cowl.
Installing
Installation is carried out in the reverse order; note the following:
–  Install lock carrier with attachments → General body repairs, exterior; Rep. gr.50.
  A19-10112
–  Allow stop for torque reaction support to rest on rubber buffer for torque reaction support under its own weight and tighten bolts -arrows-.
–  Install front bumper cover → General body repairs, exterior; Rep. gr.63.
–  Check headlight adjustment → Booklet803.
Tightening torques
  A13-0389
ComponentNm
Radiator cowl toM611
Lock carrierPanel bolt2
Stop for torque reaction support to lock carrier28

   

Removing and installing radiator fan > < Removing and installing radiator