A4 Cabriolet Mk2
Turbocharger - exploded view |
1 - | 15 Nm |
q | Property class 10.9; use only genuine bolts (same as original equipment) → Electronic parts catalogue |
2 - | Oil return pipe |
q | To cylinder block |
q | Tighten union nut to 40 Nm. |
3 - | Gasket |
q | Renew |
4 - | Connection, 40 Nm |
5 - | Seal |
q | Renew |
6 - | 20 Nm |
7 - | Gasket |
q | Renew |
8 - | Catalytic converter/particulate filter |
q | Engine codes AVB, AVF, AWX, BKE: removing and installing catalytic converter with front exhaust pipe → Chapter |
q | Removing and installing particulate filter (engine codes BPW, BRB, BRC) → Chapter |
q | After renewing particulate filter, perform "Adaption" in “Guided Functions” mode → Vehicle diagnosis, testing and information system VAS 5051. |
9 - | 23 Nm |
q | Renew |
10 - | Seal |
q | Renew |
11 - | Connection, 30 Nm |
12 - | 10 Nm |
13 - | To oil filter bracket |
14 - | Oil supply pipe |
q | Tighten union nut to 22 Nm. |
15 - | Vacuum hose |
q | From charge pressure control solenoid valve -N75- |
16 - | 25 Nm |
q | Renew |
q | Coat with high-temperature paste; for high-temperature paste refer to → Electronic parts catalogue |
17 - | Turbocharger |
q | Removing and installing - engine codes AVB, AVF, AWX, BKE → Chapter |
q | Removing and installing - engine codes BPW, BRB, BRC → Chapter |
18 - | Hose clip, 3.5 Nm |
19 - | Crankcase breather hose |
20 - | 8 Nm |
21 - | Air hose |
q | To air cleaner housing |
22 - | Support |
q | Illustration shows version for vehicles with 6-speed manual gearbox |
23 - | 40 Nm |
q | Illustration shows version for vehicles with 6-speed manual gearbox |
24 - | Seal |
q | Renew if damaged or leaking |
25 - | Air intake hose to charge air cooler |
q | Fitting instructions → Fig. |
|