–
| Unscrew nuts -1 ... 3- and lift out particulate filter. |
Installation is carried out in the reverse order; note the following: |
Note t
| Renew gaskets and self-locking nuts. |
t
| Hose connections and hoses for charge air system must be free of oil and grease before assembly. |
t
| To ensure that the charge air hoses can be properly secured at their connections, spray rust remover onto the worm thread of used hose clips before installing. |
t
| Fit all cable ties in the original positions when installing. |
–
| Install temperature sender before particulate filter -G506- → Chapter. |
–
| Align exhaust system so it is free of stress → Chapter. |
|
|
|