A4 Cabriolet Mk2
Removing, installing and checking thermostat |
Special tools and workshop equipment required |
t | Locking pin -T40011- |
t | Socket (22 mm) -3078- |
t | Locking pin -3242- |
t | Diesel injection pump locking pin -3359- |
t | Locking fluid → Parts catalogue |
|
Note
|
|
Note
|
Note
|
|
|
Note
|
|
Note
|
|
Note
|
|
|
|
|
|
|
Note
|
|
|
|
Component | Nm | ||
Thermostat housing to cylinder block | 10 → Note | ||
Viscous fan pulley to hub | 10 | ||
Tensioning roller for injection-pump toothed belt to bracket for viscous fan | 36 | ||
Drive sprocket for injection pump to camshaft | 22 | ||
Screw plug in cylinder block | M6 | 10 | |
M18 | 35 | ||
Vibration damper to injection pump sprocket | 22 | ||
Toothed belt cover (rear) to | Cylinder head | 10 | |
Injection pump | 10 | ||
Vibration damper to crankshaft sprocket | 22 |
|
Starts to open | Fully open | Opening travel |
approx. 87 °C | approx. 102 °C → Note | at least 8 mm |
|