Checking hydraulic valve compensation elements |
Note t
| The hydraulic compensation elements cannot be serviced. |
t
| Irregular valve noises when starting engine are normal. |
Special tools and workshop equipment required |
–
| Start engine and run until radiator fan has started up once. |
–
| Increase engine speed to approx. 2500 rpm for 2 minutes (perform road test if necessary). |
Note If the irregular valve noises stop but recur repeatedly during short trips, renew the oil retention valve. Fitting location of oil retention valve → Chapter. |
If the hydraulic compensation elements are still noisy, locate the defective element as follows: |
–
| Turn the crankshaft until the cam for the compensation element to be checked is pointing upwards (push vehicle forwards with 4th gear engaged and ignition switched off). |
|
|
|