audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking oil pressure and oil pressure switch F1 > < Removing and installing engine oil cooler on lock carrier

A4 Cabriolet Mk2

Removing and installing oil pressure switchF1
Removing and installing oil pressure switch -F1-
   
Removing
–  Move lock carrier to service position → Rep. Gr.50.
–  Unplug electrical connector at oil pressure switch -F1--item 2-.
–  Unscrew oil pressure switch -1-.
Installing
Installation is carried out in the reverse order; note the following:
–  Install lock carrier with attachments → Rep. Gr.50.
Tightening torque
  A17-10155
ComponentNm
Oil pressure switch to cylinder block20 1)
l  1) Renew seal.

   

Checking oil pressure and oil pressure switch F1 > < Removing and installing engine oil cooler on lock carrier