A4 Cabriolet Mk2
Ignition system - exploded view |
1 - | Knock sensor |
q | Knock sensor 1 -G61- |
q | Knock sensor 2 -G66- |
q | Knock sensor 3 -G198- |
q | Knock sensor 4 -G199- |
q | Contacts gold-plated |
q | Removing and installing → Chapter |
2 - | Ignition coil with output stage |
q | Ignition coil 1 with output stage -N70- |
q | Ignition coil 2 with output stage -N127- |
q | Ignition coil 3 with output stage -N291- |
q | Ignition coil 4 with output stage -N292- |
q | Ignition coil 5 with output stage -N323- |
q | Ignition coil 6 with output stage -N324- |
q | Ignition coil 7 with output stage -N325- |
q | Ignition coil 8 with output stage -N326- |
q | Removing and installing → Chapter |
q | Use puller -T40039- for removal |
3 - | Spark plug |
q | 30 Nm |
q | For removing and installing refer to → Booklet 803 |
4 - | Bolt |
q | 20 Nm |
q | Tightening torque influences the function of the knock sensors |
5 - | Bolt |
q | 10 Nm |
6 - | Hall sender -G40- |
q | Hall sender 2 -G163- |
q | Hall sender 3 -G300- |
q | Hall sender 4 -G301- |
q | Contacts gold-plated |
7 - | O-ring |
q | Renew O-Ring if damaged |