audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing connector for fax/laptop > < Removing and installing additional loudspeaker for telematics R91
Removing and installing additional aerial for telematicsR90
Removing and installing additional aerial for telematics -R90-
–  Switch off all electrical equipment.
–  Remove ignition key.
Removing
–  Remove side trim (rear right) → General body repairs, interior; Rep. Gr.70.
–  Unplug connector at additional aerial for telematics -R90-.
   
–  Unscrew bolt -arrow- and unclip aerial wire.
Installing
–  Installation is performed in reverse sequence.
  A91-0803

Removing and installing connector for fax/laptop > < Removing and installing additional loudspeaker for telematics R91