audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Multi-function steering wheel > < Overview of fitting locations

A4 Cabriolet Mk2

Removing and installing speech input control unitJ507
Removing and installing speech input control unit -J507-
–  Switch off all electrical equipment.
–  Remove ignition key.
Removing
–  Remove front seat (right-side) → General body repairs, interior; Rep. Gr.72.
  Note
Seat belt at seat frame does not have to be unfastened.
–  Remove A-pillar trim (bottom right): → General body repairs, interior; Rep. Gr.70.
–  Fold back the floor covering: → General body repairs, interior; Rep. Gr.70.
   
–  Release cover for electronics box -arrows- and remove cover.
  A97-0277
–  Unplug electrical connector -2- at speech input control unit -J507--1-.
–  Remove speech input control unit -J507--1- from electronics box.
Installing
–  Installation is performed in reverse sequence.
  A91-0639

Multi-function steering wheel > < Overview of fitting locations