audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing glove compartment light > < Removing and installing warning lamp for airbag deactivated on front passenger side K145 (up to 05.2004)
Removing and installing warning lamp for airbag deactivated on front passenger sideK145 (from 06.2004 onwards)
Removing and installing warning lamp for airbag deactivated on front passenger side -K145- (from 06.2004 onwards)
   
Removing
–  Release storage compartment on both sides -arrow 1- and pull compartment to rear out of dash panel -arrow 2-.
  A96-0489
–  Place a small flat-head screwdriver at top of warning lamp for airbag deactivated on front passenger side -K145-.
–  Carefully pry out warning lamp for airbag deactivated on front passenger side -K145- from switch mounting -arrows-.
–  Unplug electrical connector.
Installing
Installation is carried out in the reverse order; note the following:
–  Plug in connector.
–  Press warning lamp for airbag deactivated on front passenger side -K145- into mounting in dash panel until it engages.
  A96-0490

Removing and installing glove compartment light > < Removing and installing warning lamp for airbag deactivated on front passenger side K145 (up to 05.2004)