General information on repairs to the vehicle electrical system |
WARNING t
| Pay attention to stickers on vehicle pointing out components with high voltage. Remaining voltage must be dissipated before commencing repair work. |
t
| Certain tools are equipped with a guard. This is placed over the end of the tool after use to prevent injury to employees and to protect the tip of the tool against damage. |
|
Caution t
| Pay attention to the relevant regulations in the individual countries. |
t
| Disconnecting the battery earth cable prevents accidents when working on the vehicle electrical system. Switch off ignition before disconnecting earth wire at battery → Electrical system; Rep. gr.27. |
t
| Before commencing repair work, always eliminate cause of damage, e.g. sharp body edges, defective electrical components, corrosion etc. |
|
Note t
| Do not loosen earth straps on body if this can be avoided (danger of corrosion). |
t
| Further information, for example about removal and installation of individual components, can be found in the appropriate Workshop Manual. |
|
|
|