| –
| Locate wiring harness for warning lamp for airbag deactivated on front passenger side -K145--5- in area of opening in moulded headliner -2-. |
| –
| Plug in connector to front interior light -W1--3- and warning lamp for airbag deactivated on front passenger side -K145--5-. |
| –
| Make sure connectors engage properly (audibly). |
| –
| Install front interior light -W1--3-. |
WARNING | Make sure nobody is in the vehicle when the battery is being connected. |
|
| –
| Re-code airbag control unit -J234- → Chapter. |
| –
| Perform functional test. |
| –
| Deactivate airbag on front passenger side with key-operated switch to deactivate airbag on front passenger side -E224-. |
|
| Warning lamp for airbag deactivated on front passenger side -K145- must light up constantly. |
| –
| Activate airbag on front passenger side with key-operated switch to deactivate airbag on front passenger side -E224-. |
|
| Warning lamp for airbag deactivated on front passenger side -K145- must go out. |
| –
| Interrogate and erase fault memories of all control units. To do so, use a suitable vehicle diagnostic, testing and information system, e.g. vehicle diagnostic, testing and information system -VAS 5051B-. |
|
|
|
Note
