A4 Mk1
|
|
|
|
|
| – | Remove old wiring harness -5-. |
| – | Install new wiring harness -5-. |
| – | Route wiring harness -5- beneath trim panels -4- and -3- so that wiring harness does not rub on hinge. |
| – | Clip in trim panel -4-. |
| – | Use bolts -2- to screw in trim -3-. |
| – | Install new trim -1- with key-operated switch to deactivate airbag on front passenger side -E224- → Chapter. |
| 1 - | Coin holder with key-operated switch to deactivate airbag on front passenger side -E224- |
| 2 - | Bolts (2x) |
| 3 - | Trim for wiring harness |
| 4 - | Hinge trim |
| 5 - | Wiring harness |
