Audi Workshop Service and Repair Manuals

Assembly overview

• Combi bolt
• ◆ 4.5 Nm
• Threaded rivet
• ◆ Fit threaded rivet using special tool V.A.G 1618 A.
• Combi bolt (2x)
• ◆ 7.5 Nm
• Cross head screw
• ◆ 4.5 Nm
• Speed nut (2x)
• Wings
• ◆ Remove bumper: .
• ◆ Remove wheel housing liner
  .
• ◆ Remove locking part =>Fig.1.

• ◆ Remove headlights => Workshop Manual, Electrical System.
• ◆ Unplug electrical connectors for side turn signals.
• ‒ Unscrew bolts -1-, -3-, -4-, -7- and -11-.

• Combi bolt
• ◆ 7.5 Nm
• Bracket
• Combi bolt
• ◆ 7.5 Nm
• Speed nut
• Combi bolt
• ◆ 7.5 Nm

Fig.1→     Removing and installing end piece

• ‒ Front wheel removed.
• ‒ Removing front wheel housing liner .
• ‒ Unscrew bolts -2- (2x).
  Tightening torque 2.5 Nm.
• ‒ Remove locking element -3- from wing -4-.
• ‒ Spreader clip -1- (2x).