audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Bonnet, flaps, cab, central locking > < Front wing (from chassis number 8D XA 200 001 and S4)

A4 Mk1

General Body Assembly
Body front
Noise insulation - Exploded view
 
A50-0060
  • Quick release bolt
    • ◆ To move lock carrier to service position, unscrew only these quick release bolts.
    • ◆ 3x
    • ◆ 2 Nm
  • Front noise insulation
  • Quick release bolt
    • ◆ 3x
    • ◆ If rear noise insulation -4- is also installed, longer quick release bolts must be used
    • ◆ 2 Nm
  • Rear noise insulation
    • ◆ Only installed with certain engine versions.
    • ◆ Fitted above noise insulation -2-.
 
A50-0060
  • Quick release bolt
    • ◆ 2x
    • ◆ 2 Nm
  • Noise insulation mounting
    • ◆ -9- must point towards left side of vehicle.
  • Bolt
    • ◆ 2x
    • ◆ 7.5 Nm
  • Snap nut
    • ◆ 2x
  • Snap nut
    • ◆ 3x
  • Clamping pin
    • ◆ 2x
  • Wheel housing liner
  • Bumper
  • Lock carrier with attaching parts

Bonnet, flaps, cab, central locking > < Front wing (from chassis number 8D XA 200 001 and S4)