Outer B-pillar trim
Removing and installing outer B-pillar trim
- Outer B-pillar trim
-
‒ To remove, unclip trim cap -6- and unscrew bolts -3- and -7-.
-
‒ Install in reverse order.
-
‒ Distance between B-pillar trim and roof trim strip: dimension a =0.5 mm; dimension b=2 mm.
-
‒ B-pillar trim must be flush with seal for door component carrier -8-.
- Expanding nut (2x)
- Bolt (2x)
-
◆ Tightening torque 1.5 Nm.
|