Audi Workshop Service and Repair Manuals

• Sliding headlining
• ◆ Before removing, remove sunroof panel
• Spring for sliding headlining
• ◆ Before removing, dismantle trim frame for moulded headlining.

=> General Body Assembly; Repair group 70

• ◆ To remove, unscrew countersunk screws -6- at front and rear.
• ◆ Push front spring -2- forwards and rear spring backwards off sliding headlining and take out springs.
• ◆ Pull sliding headlining sideways out of guide rail opposite and lift out.

• Lower trim
• ◆ Removal .
• Upper trim
• ◆ Removal => Page 60-24.
• Sunroof panel
• ◆ To remove, open sunroof panel to tilt position.
• ◆ Remove left and right trims => Page 60-24.
• ◆ Remove Torx bolts (T 25) from sunroof panel on left and right and lift out panel .
• ◆ Adjusting => Page 60-26
• Panel seal
• ◆ Removal => Page 60-27.
• Countersunk screw
• ◆ 1.5 Nm