audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing sliding/tilting sunroof panel > < Removing and installing sliding/tilting sunroof panel (exploded view)
General Body Assembly
Servicing sliding/tilting sunroof - Avant
Removing and installing trim

Removing

 
A60-0047
  • ‒ Tilt sunroof.
  • ‒ Push the sliding headlining fully to the rear.
  • ‒ → Unfasten lower trim -1- from clip at rear in direction of arrow -A- and push forwards, arrow -B-.
  • ‒ Pull lower trim off guide rail towards centre of vehicle.
  • ‒ Unclip cover -2- at the front and in the centre and remove in the direction of arrow.

Installing

 
A60-0049
  • ‒ → Press lower trim -1- onto upper edge -arrows- of guide rail -2-.
 
A60-0048
  • ‒ → Press lower trim -1- backwards in direction of arrow until the locating hook locks into actuator -2-.
  • ‒ Press upper trim into guide plate.

Removing sliding/tilting sunroof panel > < Removing and installing sliding/tilting sunroof panel (exploded view)