Audi Workshop Service and Repair Manuals

Removal:

• ‒ Slide back sunroof panel to fully open position.
• ‒ → Press wind deflector -2- out of holder -3- in direction of arrow.
• ‒ Pull wind deflector backwards and out of roof cut-out.

Installation:

• ‒ → Hook spring -3- onto retaining pin of wind deflector -2-.
• ‒ Also insert spring into groove of wind deflector.

Note:

For a clearer illustration, holder -1- is shown removed.

• ‒ → Push stop -1- of wind deflector -2- forwards below the roof cut-out.
• ‒ Insert one of the retaining pins of wind deflector into holder -3-.
• ‒ On the opposite side push wind deflector in towards centre of vehicle and lock other retaining pin into bracket.