Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Making template for centre armrest cut-out >
< Removing and installing components of rear section of centre console
A4 Mk1
Body
General Body Assembly, Interior (Repair groups 68, 69, 70, 72, 74) / Interior equipment / Storage compartments/covers
Removing and installing centre armrest
General Body Assembly, Interior (Repair groups 68, 69, 70, 72, 74)
Storage compartments/covers
Removing and installing centre armrest
Centre armrest
‒
Remove handbrake lever trim
‒
To remove, nut -7- rear ashtray and tray insert must be removed.
‒
Unscrew nut -7- (3x).
‒
Remove rear section of centre console with centre armrest.
‒
Unscrew bolt - 5- (1x).
‒
Pull centre armrest -1- out of bottom part of support bracket -4-.
‒
Unscrew bolts -6- (3x).
‒
Remove bottom part of support bracket -4- from rear section of centre console -2-.
Rear centre console
Cut out for centre armrest
‒
Cut out for centre armrest -3- in centre console -2- is premarked for retrofitting on underside.
‒
For retrofitting without marking in centre console .
Bottom part of support bracket
Bolt (1x)
‒
Tightening torque 10 Nm
Bolts (3x)
‒
Tightening torque 3.5 Nm
Nut (3x)
‒
Tightening torque 10 Nm
Body
General Body Assembly, Interior (Repair groups 68, 69, 70, 72, 74) / Interior equipment / Storage compartments/covers
Removing and installing centre armrest
Making template for centre armrest cut-out >
< Removing and installing components of rear section of centre console