Audi Workshop Service and Repair Manuals

• ‒ Remove head restraint by pressing button on left head restraint guide.
• ‒ Remove rear seat back
• ‒ → Use screwdriver -2- to carefully lever head restraint guide -3- out of backrest -1-.

Note:

Take care not to damage seat fabric when prising out head restraint guide.

• ‒ → Remove screws -3- (2x).
• ‒ Press back actuating lever -5- and unscrew bolt -4-.
• ‒ Remove lock -6- from backrest -2-.
• ‒ On installing lock -6- actuating lever -5- must engage in groove in release mechanism -1-.
• ‒ Remove ski bag

• ‒ → Use screwdriver -2- to lever backrest fabric -1- out of fastening slot all round.

• ◆ Installing:

• ‒ Insert fabric with fastening strip in fastening slot and tap into place using clean plastic-headed hammer.