Audi Workshop Service and Repair Manuals

• ‒ → Insulation -1- must run all around inside of door trim -2-.
• ‒ When removing or installing insulation -1- ensure insulation is not damaged when fitting it over locating hooks or connectors.

Removing and installing front window crank

• ‒ → Press in flat side of flat screwdriver in direction of arrow -1-.
• ‒ Move flat screwdriver in direction of arrow -2-.
• ‒ Pull off trim in direction of arrow -3-.

• ‒ → Unscrew bolt -1-. Tightening torque 2.5 Nm.
• ‒ Detach window crank -2- and spacer -3-.

Assembly position, front door window crank

• ‒ → Illustration shows left-hand window crank (mirror image on right).
• ‒ Direction of travel -A-.
• ‒ Assembly position -a- with window closed.