audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing rear belt adjuster > < Removing and installing rear cross panel trim

A4 Mk1

General Body Assembly, Interior (Repair groups 68, 69, 70, 72, 74)
Trims
Removing and installing rear shelf
 
A70-0294
  • Rear shelf
  • ◆ Removing
    • ‒ Detach lower anchor of rear left and right three-point seat belt
    • ‒ Remove rear left and right side padding => Page 72-128
    • ‒ Unclip trim -5- and guide -4- for rear left and right three-point seat belt => Page 70-79
    • ‒ On vehicles with additional brake light detach additional brake light connector working from boot.
 
A70-0294
    • ‒ Unfasten clips -3- (3x) by carefully lifting rear shelf.
    • ‒ Pull out rear shelf to front.
  • ◆ Installing
    • ‒ When fitting, press down rear shelf -1- slightly until clips -2- (3x) engage.
    • ‒ Engage clips -3- (3x).
    • ‒ Perform remaining installation steps in reverse order of removal.
  • Clip (3x)
  • Clip (3x)
  • Guide
  • Cover

Removing rear belt adjuster > < Removing and installing rear cross panel trim