Audi Workshop Service and Repair Manuals

• D-pillar trim

• ◆ Removing
• ‒ Lever off cover -3-.
• ‒ Unscrew bolt -6-.

Note:

When disassembling trim of D-pillar -1- only pull on side facing window.

• ‒ Unclip trim -1- at clips -2- (3x).
• ‒ Pull cover -1- at the retaining lug -4- from the retainer upwards -3-

• ◆ Installing
• ‒ Insert trim -1- with retaining lug -4- into retainer -3-.
• ‒ Attach trim -1- at clamps -2-.

Note:

On installation of A-pillar trim only press, not knock onto side facing front disc.

• ‒ Press on trim -1-.
• ‒ Screw in bolt -6-.

• Clamp

• Mounting
• Retainer
• Trim cap
• Bolt (1x)
• ‒ Tightening torque 4 Nm
• ◆ Self-locking
• ◆ Replace
• ◆ Threaded bores for bolts must always be cleaned (e.g. with a thread tap)