Audi Workshop Service and Repair Manuals

• ‒ → Insert the auxiliary tool -A- into the holes in the dash panel vents.
• ‒ Evenly pull the dash-panel vents out of the dash-panel centre section.

Note:

If a swivel insert should become detached from the vent on removal, replace it correctly (both sides of the swivel insert must lock into place).

Notes:

• ◆ If the swivel insert should become detached from the vent on removal, replace it correctly (both sides of the swivel insert must lock into place).
• ◆ In vehicles from vehicle chassis number 200000 of Model Year 1999, the adjusting knurl is illuminated.
• ‒ The connector -B- should be inserted in the air duct in the cable grommet
• ‒ The lamp for the illumination is installed in the adjusting knurl and cannot be replaced.

Making an auxiliary tool for dismantling the dash panel vents

• ‒ → Bend a 3 mm ø wire as shown in the illustration.
• ‒ Dimension x = 6 mm