Audi Workshop Service and Repair Manuals

Note:

The rotary switches are illuminated by light guides; there is only one bulb. To replace the bulb, remove the trim on the centre section of the dash panel.

Removing

• ‒ Remove radio.

=> Electrical System; Repair group 91; Repairing radio; Removing and installing radio

• ‒ → Detach rotary switches from the heater control.
• ‒ Screw out the bolts -A- and -B-.
• ‒ Pull off the trim on the centre section of the dash panel -C-. If necessary, prise off with a small screwdriver.
• ‒ Remove the centre console from -D-

=> General Body Assembly, Interior; Repair group 68; Storage compartments/covers; Removing and installing front part of centre console

• ‒ Remove the central section of the dash panel:

=> General Body Assembly, Interior; Repair group 68; Storage compartments/covers; Removing and installing central section of dash panel

Installing

Install in reverse order.