-
‒ → Pull bellows -7- off underside of shift mechanism.
-
‒ Slacken nut -1- securing selector fork to gear stick.
-
‒ Take bolt -8- out of selector fork.
-
‒ Remove gear stick knob and cover.
-
‒ Remove noise insulation.
-
‒ Unscrew nuts -3- and -4- securing ball housing and remove the two connecting pieces -2- and -5-.
-
‒ Lift ball housing -6- out of centre console together with gear stick.
Installing
Installation is carried out in the reverse order, when doing this note the following:
-
‒ Adjusting shift mechanism
Tightening torques
|
---|
Component
|
|
Nm
|
Ball housing to housing for shift mechanism
|
23
|
Selector fork to gear stick
|
10
|
Selector rod to selector fork
|
23
|
|