Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Position of shims >
< Adjusting drive pinion and crown wheel
A4 Mk1
Power transmission
6-Speed manual gearbox 01E Four-wheel drive
Final drive, differential, differential lock
Adjusting drive pinion and crown wheel
Adjustment and labelling of pinion sets
6-speed manual gearbox 01E Four-wheel drive
Adjusting drive pinion and crown wheel
Adjustment and labelling of pinion sets
Marking "K831" indicates Klingelnberg pinion set with a ratio of 31 : 8.
Pairing number (312) of pinion set
Deviation "r" referenced to master gauge of test machine used in production; "r" is always given in 1/100 mm; Example: "25" signifies r = 0.25 mm
Ro - Length of master gauge of test machine used
"Ro" = 59.65 mm
R - Actual dimension between crown wheel shaft and end face of drive pinion at smoothest running point for this pinion set
R = Ro + r
Vo - Hypoid offset
Power transmission
6-Speed manual gearbox 01E Four-wheel drive
Final drive, differential, differential lock
Adjusting drive pinion and crown wheel
Adjustment and labelling of pinion sets
Position of shims >
< Adjusting drive pinion and crown wheel